High Density Polyethylene Lids

Item Description Vent
Capacity
(GPM)
Part Number
22″ Lid and ring with air vent 400 63679
22″ Lid, ventless with ring * 63863
16″ Lid and ring with 4″ center lid/air vent 100 60038
A 16″ Lid with 4″ center lid/air vent 100 60011
B 16″ Lid and ring with blue snap-in vent 200 63485
16″ Lid and ring with 3″ center thread 63868
16″ Ring only 60012
16″ Lid, ventless with ring 60367
C 16″ Lid, ventless 60365
4″ Lid (air vent assembly for 16″ lid) 60019
Blue snap-in vent for 16″ lid (63485) 63539
8″ Lid, ring & air vent 60032
D 8″ Lid with air vent
(For select tanks manufactured prior to 2/2/08)
60002
8″ Ring only (for 60002 lid) 60003
Snap on air vent for 8″ lid (60002) 61727
E 8″ Lid with blue snap-in vent
(For select tanks manufactured after 2/2/08)
200 63480
Blue snap-in vent for 8″ lid (63480) 63482
F 5″ Lid with ball check air vent (for tanks manufactured prior to 2/1/00) 60322
G 5” Lid with ball check air vent, with gasket 63484
5″ lid with 2″ FPT (does not include vent cap) 63264
5″ Lid, hinged, (for 52 & 68 gallon flat bottom & 110 low profile) 63673
EPDM gasket for 5″ lids 60322, 63264 or 63484 60366
18″ lanyard for 8″ lid and 16″ non-hinged lid (tethers lid to tank) 62531
Ethafoam gasket for 16″ non-hinged lid 62941
Stainless steel screw for 8″ and 16″ rings 60081
Strainer basket for 16″ fill-opening (7″ depth) 67374
* There is no connection point on this lid for a lanyard.

Hinged Lids

The hinged lid is manufactured from a co-polymer material for strength, durability and excellent chemical resistance. Our unique locking tab allows you to easily slip a padlock through it and secure your lid from theft or spills. The lid is interchangeable with a standard 16″ lid and ring assembly if you choose to replace your existing lid.

Specific features of the lid:

  • Easy open/close – opens a full 180 degrees
  • Comes complete with a baffle vent assembly which allows for adequate venting when bottom filling your tank
  • Unique locking tab
  • All parts of lid may be ordered as repair parts

Hinged Lids

Description Vent Capacity (GPM) Part Number
22″ Hinged lid with ring & vent 250 63874
16″ Hinged lid with ring & vent 100 62532
16″ Hinged lid with vent assembly, without ring 100 62826
16″ Hinged ventless lid, with ring 63390

16″ Hinged Lid Repair Parts

Description Part Number
Vent assembly 62827
Ring Assembly 62828
Hinge Assembly 62829
EPDM O-ring gasket for lid 62830
Neoprene O-ring for ring 62831

Part dimensions may vary and are subject to change without notice.

Polypropylene Bulkhead Fittings-EPDM or Viton Gaskets

Norwesco’s polypropylene fittings come standard with an EPDM gasket. Viton gaskets are available as an option when EPDM may not be suitable for your application. The 2″ stainless steel bulkhead fitting comes standard without a gasket.

聚丙烯配件与垫圈

Description Hole Size Req in Tank for Installation Item Code Part Number
1/2″ Hvy Duty dbl threaded pp fitting 1 7/16″ A 62834
3./4″ Dbl threaded pp fitting 1 7/16″ A 60401
EPDM gasket for #62834, #60401 60402
Type A Viton gasket for #62834, #60401 60360
3./4″ Hvy Duty Dbl threaded pp fitting 1 5/8″ A 62798
EPDM gasket for #662798 62799
Type A Viton gasket for #62798 62800
1″ Dbl threaded pp fitting 2 1/4″ A 60427
1 1/4″ Dbl threaded pp fitting 2 1/4″ A 60403
1 1/4″ Anti-vortex pp fitting 2 1/4″ D 63065
EPDM gasket for #60427,#60403, #63065 60404
Type A Viton gasket for #60427,#60403, #63065 60361
Anti-vortex adapter for #60403 62398
1 1/2″ Std duty Dbl threaded pp fitting 2 3/8″ A 63931
EPDM gasket for #63931 63938
Type A Viton gasket for #63931 63939
1 1/2″ Dbl threaded pp fitting 3.″ A 60124
Siphon Tube 1 1/2″ X 4 15/16″ long 63682
Siphon Tube 1 1/2″ X 12″ long 63279
2″ Dbl threaded pp fitting 3.″ A 60405
2″ Dbl threaded 316 SS fitting, less gasket 3.″ 61767
EPDM gasket for #60124, #60405, #63481, #61767 60406
Type A Viton gasket for #60124, #60405, #63481, #61767 60523
2″ Std duty Dbl threaded pp fitting * 3.″ E 63481
2″ Hvy duty Dbl threaded pp fitting * 3.1/4″ B 63683
EPDM gasket for #63683 60336
Type A Viton gasket for #63683 60008
Siphon Tube 2″ short 60335
Siphon Tube 2″ X 12″ long 63262
Anti-vortex adapter for 2″ bulkhead fitting 62399
2″ PP dust plug 60021
2″ Self-align Dbl thread pp fitting ** 60021
EPDM gasket for #63668 60331
Type A Viton gasket for #63668 60351
3.″ Dbl thread pp fitting *** 4 1/2″ C 62299
EPDM gasket for #62299 60331
Type A Viton gasket for #62299 60351
2″ PP reducer for 3″ 60330
Siphon Tube 3″ short 60327
Siphon Tube 3″ X 12″ long 63263
Siphon Tube 3″ X 19 1/2″ long 64102
4″ Dbl threaded PP fitting *** 5 3/4″ 62171
EPDM gasket for #62171 62785
Type A Viton gasket for #62171 62786
Siphon Tube for 4″ 62714

* Maximum tank wall thickness = 3/8″

** Designed to install in dome of vertical tank above liquid level

*** Hex nut as shown in photo C

Part dimensions may vary and are subject to change without notice.

Polypropylene Double Threaded Bolted Fittings

Norwesco’s polypropylene double threaded bolted fittings come standard with an EPDM gasket. Viton gaskets are available as an option when EPDM may not be suitable for your application. These fittings require 2 gaskets each.

Polypropylene Double Threaded Bolted Fittings

Description Item Code Part Number
3./4″ PP bolted fitting with SS bolts & EPDM gaskets F 60502
1″ PP bolted fitting with SS bolts & EPDM gaskets F 60505
EPDM gasket for 60502 & 60505 fittings 60498
Type A Viton gasket for 60502 & 60505 fittings 60355
1 1/2″ PP bolted fitting with SS bolts & EPDM gaskets F 60513
2″ PP bolted fitting with SS bolts & EPDM gaskets F 60516
EPDM gasket for 60513 & 60516 fittings 60497
Type A Viton gasket for 60513 & 60516 fittings 60356
3.″ PP bolted fitting with SS bolts & EPDM gaskets F 62471
EPDM gasket for 62471 fitting 62048
Type A Viton gasket for 62471 fitting 60602

Part dimensions may vary and are subject to change without notice.

Stainless Steel Double Threaded Bolted Fittings

Norwesco’s stainless steel double threaded bolted fittings are threaded into back plate – no welds or bolt holes that can be potential points of leakage. Fittings come standard without a gasket and require a single gasket installed on the inside of the tank. Available gaskets are cross-linked polyethylene, EPDM or Viton.

Stainless Steel Double Threaded Bolted Fittings

Description Item Code Part Number
1/2″ 316 SS dbl threaded bolted fitting less gasket G 63216
3./4″ 316 SS dbl threaded bolted fitting less gasket G 63035
1″ 316 SS dbl threaded bolted fitting less gasket G 62948
EPDM gasket for 63216,63035,62948 fittings 63205
Type A Viton gasket for 63216,63035,62948 fittings 63224
Cross-linked polyethylene gasket for 63216,63035,62948 fittings 62950
1 1/4″ 316 SS dbl threaded bolted fitting less gasket G 63036
Cross-linked polyethylene gasket for 63036 fitting 63041
1 1/2″ 316 SS dbl threaded bolted fitting less gasket G 63037
EPDM gasket for 63036,63037 fittings 63426
Cross-linked polyethylene gasket for 63037 fitting 63042
2″ 316 SS dbl threaded bolted fitting less gasket G 63038
EPDM gasket for 63038 fitting 63206
Type A Viton gasket for 63038 fitting 63225
Cross-linked polyethylene gasket for 63038 fitting 62848
3.″ 316 SS dbl threaded bolted fitting less gasket H 63039
EPDM gasket for 63039 fitting 63223
Type A Viton gasket for 63039 fitting 63226
Cross-linked polyethylene gasket for 63039 fitting 63043
4″ 316 SS dbl threaded bolted fitting less gasket H 63688
EPDM gasket for 63688 fitting 63690
Type A Viton gasket for 63688 fitting 63691
Cross-linked polyethylene gasket for 63688 fitting 63689

Part dimensions may vary and are subject to change without notice.